The Skylon Paragon ID3.2 12 is supplied by the dozen.
The Skylon Paragon shafts also come with 12 matching pinnock adapters so that you can use all common pinnocks.
Contrary to the illustration on the article picture, the shafts are only delivered with a pinnock adapter but without points, nocks, vanes, etc..
Technical specifications of the Skylon Paragon ID3.2
- Material: 40-TON Carbon
- Inner Diameter: 3.2mm / .125"
- Straightness Tolerance: ±.0015"
| SPINE | OUTSIDE DIAMETER | GRAIN PER INCH | LENGTH | RECOMMENDED POINT |
|---|---|---|---|---|
| 1.000" | 4.45mm | 4.70 | 30" | 60-70-80gr |
| 0.900" | 4.50mm | 4.81 | 30" | 60-70-80gr |
| 0.850" | 4.55mm | 4.94 | 30" | 80-90-100gr |
| 0.800" | 4.59mm | 5.06 | 31" | 80-90-100gr |
| 0.750" | 4.63mm | 5.31 | 31" | 80-90-100gr |
| 0.700" | 4.67mm | 5.55 | 31" | 80-90-100gr |
| 0.650" | 4.73mm | 5.83 | 31" | 80-90-100gr |
| 0.600" | 4.78mm | 6.10 | 32" | 100-110-120gr |
| 0.550" | 4.84mm | 6.50 | 32" | 100-110-120gr |
| 0.500" | 4.90mm | 6.90 | 32" | 100-110-120gr |
| 0.450" | 5.04mm | 7.42 | 32" | 100-110-120gr |
| 0.400" | 5.17mm | 7.93 | 32" | 100-110-120gr |
| 0.350" | 5.25mm | 8.47 | 32" | 100-110-120gr |
If requested, the arrow or shaft can be cut to your desired length.
Please enter the desired arrow or shaft length in 1/4-inch increments (e.g. 28.75 inches) or in centimetres (e.g. 73.3 cm).
IMPORTANT: Measure and enter the length exactly as shown in the image.
If you do not want the arrow or shaft to be cut, simply leave the text field blank.
Please note that we cut arrows and shafts to your requested length as accurately as possible. However, deviations of a few millimetres may occur.
