The Skylon Performa ID3.2 are supplied in a 12-piece package.
The Skylon Performa shafts also come with 12 matching pinnock adapters so that you can use all common pinnocks.
Contrary to the illustration on the article picture, the shafts are only delivered with a pinnock adapter but without points, nocks, vanes, etc..
Technical specifications of the Skylon Performa ID3.2
- Material: 40-TON Carbon
- Inner Diameter: 3.2mm / .125”
- Straightness Tolerance: ±.006”
| SPINE | OUTSIDE DIAMETER | GRAIN PER INCH | LENGTH | RECOMMENDED POINT |
|---|---|---|---|---|
| 1.000" | 4.45mm | 4.70 | 30" | 60-70-80gr |
| 0.900" | 4.50mm | 4.81 | 30" | 60-70-80gr |
| 0.850" | 4.55mm | 4.94 | 30" | 80-90-100gr |
| 0.800" | 4.59mm | 5.06 | 31" | 80-90-100gr |
| 0.750" | 4.63mm | 5.31 | 31" | 80-90-100gr |
| 0.700" | 4.67mm | 5.55 | 31" | 80-90-100gr |
| 0.650" | 4.73mm | 5.83 | 31" | 80-90-100gr |
| 0.600" | 4.78mm | 6.10 | 32" | 100-110-120gr |
| 0.550" | 4.84mm | 6.50 | 32" | 100-110-120gr |
| 0.500" | 4.90mm | 6.90 | 32" | 100-110-120gr |
| 0.450" | 5.04mm | 7.42 | 32" | 100-110-120gr |
| 0.400" | 5.17mm | 7.93 | 32" | 100-110-120gr |
| 0.350" | 5.25mm | 8.47 | 32" | 100-110-120gr |
If desired, the arrow-shaft can be shortened to the desired length.
To specify the arrow length you want, first select the spine value.
You can then freely enter the arrow length in the text field that appears.
Specify the arrow length in 1/4 inch increments (e.g. 28.75 inches) or in
centimeters (e.g. 73.3 centimeters).
IMPORTANT: Only specify the shaft length without nock or arrowhead,
as shown in the picture.
If you do not want the arrow or shaft to be shortened, simply leave the text field empty.
Please remember that we cut the arrows as precisely as possible to your desired length,
but there may be a deviation of a few millimeters.
Contrary to any product images, only the shafts are delivered without arrow accessories.
