Descripción del producto
El Skylon Paragon ID3.2 12 se suministra por docenas.
Los ejes Skylon Paragon también vienen con 12 adaptadores de pinnock correspondientes para que pueda utilizar todos los pinnocks estándar.
Al contrario de lo que se muestra en la imagen del producto, los ejes sólo se entregan con adaptador Pinnock pero sin puntas, levas, paletas, etc.
Especificaciones técnicas del Skylon Paragon ID3.2
- Material: Carbono 40-TON
- Diámetro interior: 3.2mm / .125"
- Tolerancia de rectitud: ±.001"
| SPINE | OUTSIDE DIAMETER | GRAIN PER INCH | LENGTH | RECOMMENDED POINT |
|---|---|---|---|---|
| 1.000" | 4.45mm | 4.70 | 30" | 60-70-80gr |
| 0.900" | 4.50mm | 4.81 | 30" | 60-70-80gr |
| 0.850" | 4.55mm | 4.94 | 30" | 80-90-100gr |
| 0.800" | 4.59mm | 5.06 | 31" | 80-90-100gr |
| 0.750" | 4.63mm | 5.31 | 31" | 80-90-100gr |
| 0.700" | 4.67mm | 5.55 | 31" | 80-90-100gr |
| 0.650" | 4.73mm | 5.83 | 31" | 80-90-100gr |
| 0.600" | 4.78mm | 6.10 | 32" | 100-110-120gr |
| 0.550" | 4.84mm | 6.50 | 32" | 100-110-120gr |
| 0.500" | 4.90mm | 6.90 | 32" | 100-110-120gr |
| 0.450" | 5.04mm | 7.42 | 32" | 100-110-120gr |
| 0.400" | 5.17mm | 7.93 | 32" | 100-110-120gr |
| 0.350" | 5.25mm | 8.47 | 32" | 100-110-120gr |
If desired, the arrow-shaft can be shortened to the desired length.
To specify the arrow length you want, first select the spine value.
You can then freely enter the arrow length in the text field that appears.
Specify the arrow length in 1/4 inch increments (e.g. 28.75 inches) or in
centimeters (e.g. 73.3 centimeters).
IMPORTANT: Only specify the shaft length without nock or arrowhead,
as shown in the picture.
If you do not want the arrow or shaft to be shortened, simply leave the text field empty.
Please remember that we cut the arrows as precisely as possible to your desired length,
but there may be a deviation of a few millimeters.
Contrary to any product images, only the shafts are delivered without arrow accessories.
Productos Recomendados
Review(s)