Beiter Arrow Rest

The Beiter Rest for Recurve is the first arrow rest brought onto the market by Werner Beiter.
The development of this first arrow rest for recurve is the result of years of testing,
numerous prototypes and hundreds of high-speed recordings.

The Beiter Rest for Recurve:

• is intended for both right-handed and left-handed shooters!
• allows the shooter to do it in just a few seconds to switch from carbon to aluminum arrows, for example!
• A scale on the support enables reproducible adjustment. This means the rest can be adjusted in height very precisely. and thus allows fine adjustment of the nocking point and the arrow position on the button.
• According to test shooters, it is almost silent!

The support finger of the Beiter Rest is held on the support by a precise guide system and positioned with a spindle. By tilting the guide (up to approx. 15°), the center of the arrow to the plunger and nocking point can be precisely adjusted! A scale on the support enables reproducible adjustment. 
Currently 3 fingers are offered:

Arrow diameter/finger:

• 15-12-0.65 for arrows with a small diameter Ø 5.2mm +/-1mm (approx. 10/64"-14/64")
• 16-17-0.65 for arrows with a medium diameter Ø 7.8mm +/-1mm (approx. 15/64"-19/64")
• 17-23-0.77 for arrows with a large diameter Ø 9.3mm +/-1mm (approx. 20/64"-24/64")
• Extra fingers are available individually or in a pack of 10 available.

There are also 3 supports available in different thicknesses #S1, #S2 (corresponds to #S1 + 1mm), #S3 (corresponds to S#1 + 2mm)in order to still achieve the desired arrow position for risers that are cut out differently.

Please note the following:

• You will find information on the finger that corresponds to one for clear assignment: The number "15 (S #1)" or "17 (S #1)" means that you can shoot an arrow position up to 15mm (distance "A" => inner edge of the bow window to outer edge of the arrow) with support #1.
• The circled numbers indicate which arrow diameters can be used with the respective support: 12 10/64" to 14/64", 23 20/64" to 24/64".
• The last number (e.g. 0.65) indicates the thickness of the rest finger in millimeters.

We recommend in combination with the Beiter Rest:

• Beiter Plunger: the steel sleeve has the same diameter (Ø 6.0mm) as the hole in the arrow rest. This allows for precise positioning and support of the arrow rest and serves as a pivot point during assembly.
• Nock position: Turn the nock so that the springs are in the "Y position" relative to the string (pictures will be available soon on our website). This ensures the greatest possible free space at the rear end of the arrow and the arrow can pass unhindered at the arrow rest.

The arrow rest is completely assembled.