Shocq Fletched Arrow Inceptor X
Art.Nr.: 2431003
Manufacturer: Shocq
EUR 89,99
incl. 19 % impuestost
The Shocq Fletched Arrow Inceptor X features 0.0015” straightness, shield cut vanes (1.75”), and a pre-installed nock and pin. Supplied with point and available in multiple spine options for target, competition and youth use.
Features of the Shocq Inceptor X ready to shoot arrows
- Carbon construction
- Straightness tolerance 0.0015
- Shield cut vanes
- Spine range: 400–1000
- Stock length range 32"
- Inner diameter 4.2 mm
- Includes nock, pin, and point
- Nock and pin installed
Technical Data of the Shocq Inceptor X Shafts
| SPINE | OD in mm | ID in mm | GPI | Length | BREAK-OFF Point (gr) |
| 400 | 6,09 | 4,2 | 9,2 | 32" | 100gr - 120gr |
| 500 | 5,82 | 4,2 | 7,96 | 32" | 80gr - 100gr |
| 600 | 5,7 | 4,2 | 7,16 | 32" | 80gr - 100gr |
| 700 | 5,62 | 4,2 | 6,51 | 32" | 80gr - 100gr |
| 800 | 5,46 | 4,2 | 5,72 | 32" | 80gr - 100gr |
| 900 | 5,39 | 4,2 | 5,45 | 32" | 60gr - 80gr |
| 1000 | 5,3 | 4,2 | 4,98 | 32" | 60gr - 80gr |
If desired, the arrow can be shortened to the desired length and we will then glue the point
into the shaft with hot glue. There are no additional costs for this.
To specify the arrow length you require, please first select the spine value.
You can then freely enter the arrow length in the text field that appears.
Enter the arrow length in 1/4 inch increments (e.g. 28.75 inches) or in
centimeters (e.g. 73.3 centimeters).
IMPORTANT: Enter the arrow length from the base of the nocking point up to and including the point,
as shown in the picture.
If you do not want the arrow or shaft to be shortened, simply leave the text field empty.
We then attach the points to the uncut arrow as desired.
Please remember that we shorten the arrows as precisely as possible to your desired length,
however, there can be a deviation of a few millimeters.